Silicon Polymer Protective Sealer
Restore colour, add a soft sheen and protect porous craft surfaces.
Concrete Artz Silicon Polymer is a ready-to-use protective finishing sealer specially suited for cement, Snow Casting Powder, gypsum, plaster, jesmonite and other porous craft surfaces.
It helps revive dull or chalky-looking pieces by deepening the natural colour while leaving a smooth, clear soft-sheen finish. Once applied, it also helps reduce surface powderiness and improves resistance against everyday water, stains, dirt, oil and grease.
Unlike a heavy glossy coating, Silicon Polymer gives handmade pieces a more refined finished appearance while allowing the character and texture of the material to remain visible.
Key Benefits
Restores & enhances colour
Clear soft-sheen finish
Helps reduce dust and surface powderiness
Improves water resistance
Helps resist stains, dirt, oil & grease
Minimal brush marks
Non-yellowing
Non-flammable
No VOC
Ready to use
Suitable For
Ideal for coasters, trays, pots, home décor, ornaments and handmade casting projects.
How to Use
Ensure the finished piece is completely dry, clean and free from dust.
Apply a very thin, even coat using a soft brush or sponge brush.
Allow approximately 30 minutes to dry.
Apply additional thin coats as required.
For improved water resistance, apply 2–3 thin coats.
Tip: Test on a small hidden area first, especially on strongly coloured or highly porous pieces, as the sealer may deepen the appearance of the colour.
Finish
Clear • Soft Sheen • Colour Enhancing
Available Sizes
100ml | 200ml
Important: Silicon Polymer is a protective water-resistant sealer, not a fully waterproof coating. For projects requiring waterproof protection while maintaining a natural matte appearance, use Concrete Artz Waterproof Sealer instead.
Silicon Polymer Protective Sealer
Restore colour, add a soft sheen and protect porous craft surfaces.
Concrete Artz Silicon Polymer is a ready-to-use protective finishing sealer specially suited for cement, Snow Casting Powder, gypsum, plaster, jesmonite and other porous craft surfaces.
It helps revive dull or chalky-looking pieces by deepening the natural colour while leaving a smooth, clear soft-sheen finish. Once applied, it also helps reduce surface powderiness and improves resistance against everyday water, stains, dirt, oil and grease.
Unlike a heavy glossy coating, Silicon Polymer gives handmade pieces a more refined finished appearance while allowing the character and texture of the material to remain visible.
Key Benefits
Restores & enhances colour
Clear soft-sheen finish
Helps reduce dust and surface powderiness
Improves water resistance
Helps resist stains, dirt, oil & grease
Minimal brush marks
Non-yellowing
Non-flammable
No VOC
Ready to use
Suitable For
Ideal for coasters, trays, pots, home décor, ornaments and handmade casting projects.
How to Use
Ensure the finished piece is completely dry, clean and free from dust.
Apply a very thin, even coat using a soft brush or sponge brush.
Allow approximately 30 minutes to dry.
Apply additional thin coats as required.
For improved water resistance, apply 2–3 thin coats.
Tip: Test on a small hidden area first, especially on strongly coloured or highly porous pieces, as the sealer may deepen the appearance of the colour.
Finish
Clear • Soft Sheen • Colour Enhancing
Available Sizes
100ml | 200ml
Important: Silicon Polymer is a protective water-resistant sealer, not a fully waterproof coating. For projects requiring waterproof protection while maintaining a natural matte appearance, use Concrete Artz Waterproof Sealer instead.
Image 1 of 7
Image 2 of 7
Image 3 of 7
Image 4 of 7
Image 5 of 7
Image 6 of 7
Image 7 of 7
