SNOW Casting Powder
Smooth Finish • Quick-Setting • Strong • Easy to Use
Create smooth, beautifully detailed craft pieces with SNOW Casting Powder, a gypsum-based casting material developed for makers, artists, workshops and DIY projects.
Simply add water, mix and pour. Its easy-to-use formula produces a refined matte finish with excellent mould detail and is formulated to help minimise trapped air bubbles during casting.
SNOW Casting Powder is water-based, solvent-free and contains no VOCs, making it suitable for home crafting, creative studios and workshops.
Why You'll Love It
Quick Setting
Most pieces can be demoulded in approximately 30–45 minutes.
Smooth Matte Finish
Produces a clean, refined surface with excellent mould detail.
Strong & Durable
Creates firm cast pieces with good surface hardness for decorative and everyday craft applications.
Self-Bubble Release
Formulated to help reduce trapped air bubbles for smoother casting results.
Water-Based & Solvent-Free
Contains no solvents or VOCs.
Easy to Customise
Add pigments, terrazzo chips, decorative glass, aggregates and other creative inclusions.
Beginner-Friendly
No specialised machinery or equipment is required.
Mixing Ratio
100 parts SNOW Casting Powder : 35 parts water
Example:
100g powder + 35g water
Working & Setting Time
Working Time: Approximately 6–8 minutes
Demoulding Time: Approximately 30–45 minutes
Drying Time: Allow approximately 24 hours before sealing or prolonged use.
Larger or thicker pieces may require additional setting and drying time.
How to Use
Prepare your moulds, pigments and tools before mixing.
Measure the required amount of water.
Add SNOW Casting Powder.
Mix gently and thoroughly until smooth.
Add pigment or decorative materials if desired.
Pour the mixture into your silicone mould.
Gently tap or vibrate the mould to help release trapped air.
Allow the piece to set before carefully demoulding.
Leave the finished piece to dry fully before sealing.
Add Colour & Creative Effects
SNOW Casting Powder can be customised to create a wide variety of finishes.
Add Colour
Compatible with suitable colourants such as:
Iron oxide pigments
Water-based pigments
Acrylic colourants
Start with a small amount of pigment and gradually increase until your desired colour is achieved.
Add Texture
Experiment with:
Terrazzo chips
Coloured glass
Fine aggregates
Sand
Decorative flakes
Create finishes such as terrazzo, marble, stone, Gemlight and other decorative effects.
Recommended Sealers
Sealing your finished piece can improve resistance to stains and moisture.
Type 2 – Silicone Polymer Sealer
Suitable for general craft pieces where a natural-looking, water-resistant finish is preferred.
Type 4 – Waterproof Sealer
Recommended for pieces that may experience more frequent exposure to moisture.
Epoxy Resin
Creates a glossy, glass-like finish with enhanced surface protection.
Storage & Shelf Life
Store unused SNOW Casting Powder in a cool, dry place.
Keep the packaging tightly sealed and protect the powder from humidity and moisture.
Shelf Life: Up to 12 months when stored correctly.
Tips for Better Results
To reduce bubbles
Mix gently and thoroughly. After pouring, lightly tap or vibrate the mould to encourage trapped air to rise.
If your casting feels weak or brittle
Check the water-to-powder ratio. Excess water may reduce the strength of the finished piece.
For easier demoulding
Use clean, flexible silicone moulds and allow sufficient setting time before removing the piece.
For moisture-prone pieces
Allow the piece to dry fully before applying a suitable protective or waterproof sealer.
Safety & Handling
Avoid inhaling fine powder during handling and mixing.
A dust mask is recommended when handling larger quantities.
Gloves may be worn to keep hands clean.
Keep unused powder dry and away from unsupervised children.
Do not pour leftover casting mixture into sinks or drains.
Allow unused mixture to harden before disposal according to local waste guidelines.
Perfect For
Coasters • Trays • Home Décor • Terrazzo Crafts • Marble Effects • Jewellery Dishes • Planters • Figurines • Workshops • DIY Kits • Customised Gifts
Just Add Water, Mix, Pour & Create.
SNOW Casting Powder
Smooth Finish • Quick-Setting • Strong • Easy to Use
Create smooth, beautifully detailed craft pieces with SNOW Casting Powder, a gypsum-based casting material developed for makers, artists, workshops and DIY projects.
Simply add water, mix and pour. Its easy-to-use formula produces a refined matte finish with excellent mould detail and is formulated to help minimise trapped air bubbles during casting.
SNOW Casting Powder is water-based, solvent-free and contains no VOCs, making it suitable for home crafting, creative studios and workshops.
Why You'll Love It
Quick Setting
Most pieces can be demoulded in approximately 30–45 minutes.
Smooth Matte Finish
Produces a clean, refined surface with excellent mould detail.
Strong & Durable
Creates firm cast pieces with good surface hardness for decorative and everyday craft applications.
Self-Bubble Release
Formulated to help reduce trapped air bubbles for smoother casting results.
Water-Based & Solvent-Free
Contains no solvents or VOCs.
Easy to Customise
Add pigments, terrazzo chips, decorative glass, aggregates and other creative inclusions.
Beginner-Friendly
No specialised machinery or equipment is required.
Mixing Ratio
100 parts SNOW Casting Powder : 35 parts water
Example:
100g powder + 35g water
Working & Setting Time
Working Time: Approximately 6–8 minutes
Demoulding Time: Approximately 30–45 minutes
Drying Time: Allow approximately 24 hours before sealing or prolonged use.
Larger or thicker pieces may require additional setting and drying time.
How to Use
Prepare your moulds, pigments and tools before mixing.
Measure the required amount of water.
Add SNOW Casting Powder.
Mix gently and thoroughly until smooth.
Add pigment or decorative materials if desired.
Pour the mixture into your silicone mould.
Gently tap or vibrate the mould to help release trapped air.
Allow the piece to set before carefully demoulding.
Leave the finished piece to dry fully before sealing.
Add Colour & Creative Effects
SNOW Casting Powder can be customised to create a wide variety of finishes.
Add Colour
Compatible with suitable colourants such as:
Iron oxide pigments
Water-based pigments
Acrylic colourants
Start with a small amount of pigment and gradually increase until your desired colour is achieved.
Add Texture
Experiment with:
Terrazzo chips
Coloured glass
Fine aggregates
Sand
Decorative flakes
Create finishes such as terrazzo, marble, stone, Gemlight and other decorative effects.
Recommended Sealers
Sealing your finished piece can improve resistance to stains and moisture.
Type 2 – Silicone Polymer Sealer
Suitable for general craft pieces where a natural-looking, water-resistant finish is preferred.
Type 4 – Waterproof Sealer
Recommended for pieces that may experience more frequent exposure to moisture.
Epoxy Resin
Creates a glossy, glass-like finish with enhanced surface protection.
Storage & Shelf Life
Store unused SNOW Casting Powder in a cool, dry place.
Keep the packaging tightly sealed and protect the powder from humidity and moisture.
Shelf Life: Up to 12 months when stored correctly.
Tips for Better Results
To reduce bubbles
Mix gently and thoroughly. After pouring, lightly tap or vibrate the mould to encourage trapped air to rise.
If your casting feels weak or brittle
Check the water-to-powder ratio. Excess water may reduce the strength of the finished piece.
For easier demoulding
Use clean, flexible silicone moulds and allow sufficient setting time before removing the piece.
For moisture-prone pieces
Allow the piece to dry fully before applying a suitable protective or waterproof sealer.
Safety & Handling
Avoid inhaling fine powder during handling and mixing.
A dust mask is recommended when handling larger quantities.
Gloves may be worn to keep hands clean.
Keep unused powder dry and away from unsupervised children.
Do not pour leftover casting mixture into sinks or drains.
Allow unused mixture to harden before disposal according to local waste guidelines.
Perfect For
Coasters • Trays • Home Décor • Terrazzo Crafts • Marble Effects • Jewellery Dishes • Planters • Figurines • Workshops • DIY Kits • Customised Gifts
Just Add Water, Mix, Pour & Create.
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10